"$usedvprofile" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$usedvprofile par%dvfile xmin , xmax , position_offset_from_ddcc_to_MC dVfile format is N X1 E1 vel_1 X2 E2 vel_2 X3 E3 vel_3 X4 E4 vel_4 .......") |
|||
| (未顯示同一使用者於中間所作的 2 次修訂) | |||
| 行 2： | 行 2： | ||
par%dvfile |
par%dvfile |
||
xmin , xmax , position_offset_from_ddcc_to_MC |
xmin , xmax , position_offset_from_ddcc_to_MC |
||
| + | |||
| + | unit (cm, V/cm, cm/s ) for position, Electric field and velocity |
||
| 行 18： | 行 20： | ||
$usedvprofile |
$usedvprofile |
||
dvMCfilename |
dvMCfilename |
||
| − | 21. |
+ | 21.0e-7 41.0e-7 21.0e-7 |
| + | |||
| + | dvMCfilename file's content is |
||
| − | dVfile is |
||
201 |
201 |
||
| − | 0. |
+ | 0.0e-7 100.0 1.0e6 |
| − | 0. |
+ | 0.1e-7 100.0 1.2e6 |
| − | 0. |
+ | 0.2e-7 |
... |
... |
||
... |
... |
||
| − | 20. |
+ | 20.0e-7 |
於 2021年2月17日 (三) 11:00 的最新修訂
$usedvprofile par%dvfile xmin , xmax , position_offset_from_ddcc_to_MC
unit (cm, V/cm, cm/s ) for position, Electric field and velocity
dVfile format is
N X1 E1 vel_1 X2 E2 vel_2 X3 E3 vel_3 X4 E4 vel_4 .... For example, MC runs 20nm. from 0 to 20nm, DDCC's channel region is 21.0nm to 41nm. So the command is $usedvprofile dvMCfilename 21.0e-7 41.0e-7 21.0e-7
dvMCfilename file's content is
201 0.0e-7 100.0 1.0e6 0.1e-7 100.0 1.2e6 0.2e-7 ... ... 20.0e-7
