$layernumber
出自 DDCC TCAD TOOL Manual
於 2018年7月27日 (五) 17:52 由 DDCC-3D (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "Format: $layernumber number Example: $layernumber 10 It use in strain solver to check your layer numbers. It should be the same as your GMSH mesh layer n...")
Format:
$layernumber number
Example:
$layernumber 10
It use in strain solver to check your layer numbers.
It should be the same as your GMSH mesh layer number.
