$addbiascontact
出自 DDCC TCAD TOOL Manual
$addbiascontact is a command to provide extra fixed bias contact. The command is as following
$addbiascontact N Surface_num type1 Bias1 barrier1 Surface_num type2 Bias2 barrier2 ... Surface_num typeN BiasN barrierN Surface_num : is the surface number of gmsh's msh
Type = 1: Schotkky barrier, Provide Schottky barrier related to Ec Type = 2: Schotkky barrier but us affinity , Provide the metal workfunc
Bias : The applied bias barrier : The Schotkky barrier (or work function) depending on type 1 or 2
For example
$addbiascontact 2 10 1 2.0 1.2 211 2 3.0 4.3 (4.3 is the electron affinity)
Note: if type == 2, the function $affinity (3D) should be activated
