"$RCWArefractiveindex" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in $RCWAxdiv. It also needs to goes with the $RCWAxdiv a...") |
|||
| 行 1： | 行 1： | ||
| − | The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in [[$RCWAxdiv]]. It also needs to goes with the [[$RCWAxdiv]] and [[$RCWAperiod]] to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period. |
||
| + | The $RCWArefractiveindex command is used to define the refractive index in each region with different wavelength. |
||
$RCWArefractiveindex<br> |
$RCWArefractiveindex<br> |
||
[n_{1,1} n_{1,2} n_{1,3}]-lambda1 [n_{1,1} n_{1,2} n_{1,3}]-lambda2 layer1 - Nlambda * xdiv |
[n_{1,1} n_{1,2} n_{1,3}]-lambda1 [n_{1,1} n_{1,2} n_{1,3}]-lambda2 layer1 - Nlambda * xdiv |
||
於 2020年6月16日 (二) 10:30 的最新修訂
The $RCWArefractiveindex command is used to define the refractive index in each region with different wavelength.
$RCWArefractiveindex
[n_{1,1} n_{1,2} n_{1,3}]-lambda1 [n_{1,1} n_{1,2} n_{1,3}]-lambda2 layer1 - Nlambda * xdiv [n_{2,1} n_{2,2} n_{2,3}]-lambda1 [n_{2,1} n_{2,2} n_{2,3}]-lambda2 layer2 - Nlambda * xdiv ... total layer
