"$SourceFrequency" 修訂間的差異

出自 DDCC TCAD TOOL Manual
前往: 導覽搜尋
(已建立頁面,內容為 "= Not finish = =='''Format'''== $SourceFrequency ''fp1 fp2'' <font color=green>// where ''fp1-2'' are floating points.</font> <font size=3> Sou...")
 
 
(未顯示同一使用者於中間所作的 5 次修訂)
行 1: 行 1:
= Not finish =
 
 
=='''Format'''==
 
=='''Format'''==
 
$SourceFrequency
 
$SourceFrequency
''fp1 fp2'' <font color=green>// where ''fp1-2'' are floating points.</font>
+
''freq range f<sub>σ</sub> f<sub>t0</sub>'' <font color=green>// all are floating points.</font>
   
 
<font size=3>
 
<font size=3>
Source%dir, Source%posi.
+
Source%freq, Source%range, Source%fac_sig, Source%fac_t0
 
</font>
 
</font>
  +
  +
When the units digit of type in [[$SourceType]] is
  +
1: only ''freq'' works, which represents what the frequency is.
  +
2: ''range f<sub>σ</sub> f<sub>t0</sub>''
  +
3: ''freq range f<sub>σ</sub> f<sub>t0</sub>''
  +
4: ''freq ????''
  +
  +
''range'' means what the bandwidth you want to simulate. <br>
  +
''f<sub>σ</sub>'' means the edge of bandwidth is located at ''f<sub>σ</sub>''th of Gaussian sigma (σ). <br>
  +
''f<sub>t0</sub>'' means the source starts at ''f<sub>t0</sub>'' times σ. <br>
   
 
=='''Example'''==
 
=='''Example'''==
 
$SourceFrequency
 
$SourceFrequency
1.5e15 1e13
+
1e15 0.5e15 3 5
 
This means the program has 2 objects in the simulation.
 
   
  +
This means the center of frequency is 1e15 Hz, 1.5e15 and 0.5e15 are at 3σ of Gaussian distribution, and the source will starts when the time is over 5σ.
   
 
== '''Related commands''' ==
 
== '''Related commands''' ==
: [[$SourceType]], [[$SourcePosition]]
+
: [[$SourceType]], [[$SourceAmp]], [[$SourcePosition]], [[$SourceFrequency]]

於 2021年2月25日 (四) 13:37 的最新修訂

Format

$SourceFrequency
 freq    range    fσ    ft0                // all are floating points.

Source%freq, Source%range, Source%fac_sig, Source%fac_t0

 When the units digit of type in $SourceType is
 1: only freq works, which represents what the frequency is.
 2: range    fσ    ft0
 3: freq    range    fσ    ft0
 4: freq    ????

range means what the bandwidth you want to simulate.
fσ means the edge of bandwidth is located at fσth of Gaussian sigma (σ).
ft0 means the source starts at ft0 times σ.

Example

$SourceFrequency
 1e15    0.5e15    3    5

This means the center of frequency is 1e15 Hz, 1.5e15 and 0.5e15 are at 3σ of Gaussian distribution, and the source will starts when the time is over 5σ.

Related commands

$SourceType, $SourceAmp, $SourcePosition, $SourceFrequency