"$UseAuger" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) |
Jameshuang (對話 | 貢獻) |
||
| 行 2： | 行 2： | ||
<big><big>'''format'''</big></big> |
<big><big>'''format'''</big></big> |
||
| − | $useauger |
||
| + | $Useauger |
||
1st layer layer's auger coefficient |
1st layer layer's auger coefficient |
||
2nd layer layer's auger coefficient |
2nd layer layer's auger coefficient |
||
| 行 10： | 行 10： | ||
(Unit cm^6 s) |
(Unit cm^6 s) |
||
<big><big>'''example'''</big></big> |
<big><big>'''example'''</big></big> |
||
| − | $ |
+ | $Useauger |
8.0e-031 |
8.0e-031 |
||
8.0e-031 |
8.0e-031 |
||
於 2017年8月15日 (二) 15:06 的修訂
This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer.
format
$Useauger 1st layer layer's auger coefficient 2nd layer layer's auger coefficient 3rd layer layer's auger coefficient . . . nth layer layer's auger coefficien (Unit cm^6 s)
example
$Useauger 8.0e-031 8.0e-031 8.0e-031
