"$UseAuger" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) |
|||
(未顯示由 1 位使用者於中間所作的 2 次修訂) | |||
行 1: | 行 1: | ||
This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer. |
This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer. |
||
− | <big><big>''' |
+ | <big><big>'''Format'''</big></big> |
− | $ |
+ | $Useauger |
1st layer layer's auger coefficient |
1st layer layer's auger coefficient |
||
2nd layer layer's auger coefficient |
2nd layer layer's auger coefficient |
||
3rd layer layer's auger coefficient |
3rd layer layer's auger coefficient |
||
. . . |
. . . |
||
− | nth layer layer's auger coefficien |
+ | nth layer layer's auger coefficien <math>(cm^{6}s^{-1})</math> the nth layer is decided by [[$totallayer]] |
− | + | ||
− | <big><big>''' |
+ | <big><big>'''Example'''</big></big> |
− | $ |
+ | $Useauger |
− | 8.0e- |
+ | 8.0e-31 |
− | 8.0e- |
+ | 8.0e-31 |
− | 8.0e- |
+ | 8.0e-31 |
於 2017年10月18日 (三) 10:57 的最新修訂
This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer.
Format
$Useauger 1st layer layer's auger coefficient 2nd layer layer's auger coefficient 3rd layer layer's auger coefficient . . . nth layer layer's auger coefficien the nth layer is decided by $totallayer
Example
$Useauger 8.0e-31 8.0e-31 8.0e-31