"$UseAuger" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) (已建立頁面，內容為 "ㄔhis function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer. format $useauger 1st layer layer...") |
|||
| (未顯示由 1 位使用者於中間所作的 4 次修訂) | |||
| 行 1： | 行 1： | ||
| − | + | This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer. |
|
| − | format |
||
| + | <big><big>'''Format'''</big></big> |
||
| − | $useauger |
||
| + | $Useauger |
||
1st layer layer's auger coefficient |
1st layer layer's auger coefficient |
||
2nd layer layer's auger coefficient |
2nd layer layer's auger coefficient |
||
3rd layer layer's auger coefficient |
3rd layer layer's auger coefficient |
||
. . . |
. . . |
||
| − | nth layer layer's auger coefficien |
+ | nth layer layer's auger coefficien <math>(cm^{6}s^{-1})</math> the nth layer is decided by [[$totallayer]] |
| − | + | ||
| − | + | <big><big>'''Example'''</big></big> |
|
| − | $ |
+ | $Useauger |
| − | 8.0e- |
+ | 8.0e-31 |
| − | 8.0e- |
+ | 8.0e-31 |
| − | 8.0e- |
+ | 8.0e-31 |
於 2017年10月18日 (三) 10:57 的最新修訂
This function is to consider the auger recombination in the device. Fill in the auger recombination coefficient of each layer.
Format
$Useauger 1st layer layer's auger coefficient 2nd layer layer's auger coefficient 3rd layer layer's auger coefficient . . . nth layer layer's auger coefficienthe nth layer is decided by $totallayer
Example
$Useauger 8.0e-31 8.0e-31 8.0e-31
