$UseAuger

出自 DDCC TCAD TOOL Manual
於 2017年8月15日 (二) 12:51 由 Jameshuang (對話 | 貢獻) 所做的修訂 (已建立頁面,內容為 "ㄔhis function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer. format $useauger 1st layer layer...")

(差異) ←上個修訂 | 最新修訂 (差異) | 下個修訂→ (差異)
前往: 導覽搜尋

ㄔhis function is to consider the auger recombination in the device. fill in the auger recombination coefficient of each layer.

format

$useauger
1st layer layer's auger coefficient
2nd layer layer's auger coefficient
3rd layer layer's auger coefficient
. . . 
nth layer layer's auger coefficien 
(Unit cm^6 s)

example

$useauger 
8.0e-031 
8.0e-031 
8.0e-031