$addbiascontact

出自 DDCC TCAD TOOL Manual
於 2018年12月19日 (三) 09:54 由 Yrwu (對話 | 貢獻) 所做的修訂 (已建立頁面，內容為 "$addbiascontact is a command to provide extra fixed bias contact. The command is as following $addbiascontact N type1 Bias1 barrier1 type2 Bi...")

(差異) ←上個修訂 | 最新修訂 (差異) | 下個修訂→ (差異)
前往： 導覽、 搜尋

$addbiascontact is a command to provide extra fixed bias contact. The command is as following 

  $addbiascontact
  N  
  type1   Bias1   barrier1 
  type2   Bias2   barrier2 
   ...
  typeN   BiasN   barrierN
   

Type = 1:  Schotkky barrier, Provide Schottky barrier related to Ec
Type = 2:  Schotkky barrier but us affinity , Provide the metal workfunc
Type = 3:  barrier decided by dopant density ( doping density should not be zero) 

Bias : The applied bias 
barrier :  The Schotkky barrier  (or work function) depending on type 1 or 2
取自 "http://yrwu-wk.ee.ntu.edu.tw/mediawiki/index.php?title=$addbiascontact&oldid=1706"