$float-gate
出自 DDCC TCAD TOOL Manual
於 2017年8月29日 (二) 10:26 由 Yrwu (對話 | 貢獻) 所做的修訂 (已建立頁面,內容為 "$float-gate is the command to set the surface potential to be free boundary, where the fix boundary will not be used. In this case, it will set slope at the boundary...")
$float-gate is the command to set the surface potential to be free boundary, where the fix boundary will not be used. In this case, it will set slope at the boundary is the same as its neighbor.