"$gatewithworkfunc" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "This function is used when the gate contact is adjacent with two or more materials that has different affinities. To activate this, use can just fill in the work fun...") |
|||
| 行 3： | 行 3： | ||
For example: |
For example: |
||
| − | + | $gatewithworkfunc |
|
| − | + | 5.1 |
|
| + | $affinity |
||
| + | 4.05 |
||
| + | 1.25 |
||
| + | 2.35 |
||
| − | Then the work function of the gate contact is 5.1 eV. |
+ | Then the work function of the gate contact is 5.1 eV. If the contact material is 4.05eV, then the Schottky barrier is 1.05eV. |
| + | |||
| + | <br> |
||
| + | |||
| + | [[$affinity]], |
||
於 2017年8月14日 (一) 21:28 的最新修訂
This function is used when the gate contact is adjacent with two or more materials that has different affinities. To activate this, use can just fill in the work function of the metal contact and this function should be used with the $affinity. For example:
$gatewithworkfunc 5.1
$affinity 4.05 1.25 2.35
Then the work function of the gate contact is 5.1 eV. If the contact material is 4.05eV, then the Schottky barrier is 1.05eV.
