$gaussiantraps

出自 DDCC TCAD TOOL Manual
於 2017年9月6日 (三) 21:15 由 Yrwu (對話 | 貢獻) 所做的修訂

前往: 導覽搜尋

Function gaussian-distribution traps.

Format

$gaussiantraps
 1
 type Nt Et σ degeneracy \tau_n~~~ \tau_p

Parameter Explanation

  • type : type = 1 is electron trap and type = 2 is hole trap.
  • Nt : total trap concerntraion. The positive and negative value is decided by type. There is no need to put (+ or -) here. For example 1.0e16 (cm^{-3})
  • Et : the depth of traps central. (eV). The position of Et is decided by related position to Ec. For example, if trap is 1.1eV below conduction band, -1.1eV is used. Hole trap is using the same definition as electron trap, which is related to Ec also.
  • σ : the FWHM of trap. (eV)
  • degeneracy the degeneracy of traps we usually set as 1.
  • \tau_n : nonradiative lifetime of electrons. (Sec.)
  • \tau_p : nonradiative lifetime of holes. (Sec.)

Note that usually  \tau = \frac{1}{N_{t}v_{th}\sigma} . Therefore, when Nt is increased, the non-radiative lifetime should decrease as well. Users need to adjust this by themselves.


Example

$gaussiantraps
1
1 9e16 -3.3 0.12 1 1e-8 1e-8 
1 9e16 -3.3 0.12 1 1e-8 1e-8 
1 9e16 -3.3 0.12 1 1e-8 1e-8 
1 9e16 -3.3 0.12 1 1e-8 1e-8