"$ifapplytauofT" 修訂間的差異

出自 DDCC TCAD TOOL Manual
前往: 導覽搜尋
 
行 13: 行 13:
   
 
<math> \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} </math>
 
<math> \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} </math>
  +
  +
  +
The related commands are: [[$ifapplytauofT]], [[$ifapplymuofT]], [[$ifapplyEgofT]], [[$ifTversusJ]]

於 2021年6月9日 (三) 09:41 的最新修訂

$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions are used, then you will need to set up n regions. The format is

$ifapplytauofT
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
...
...
... 
p1 p2 p3 p4 .....p6


 \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2}  , and  \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} 


The related commands are: $ifapplytauofT, $ifapplymuofT, $ifapplyEgofT, $ifTversusJ