$ifapplytauofT

出自 DDCC TCAD TOOL Manual
於 2021年6月8日 (二) 12:25 由 Yrwu (對話 | 貢獻) 所做的修訂 (已建立頁面,內容為 "$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if tot...")

(差異) ←上個修訂 | 最新修訂 (差異) | 下個修訂→ (差異)
前往: 導覽搜尋

$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is

$usetaunrbyfunc
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
p1 p2 p3 p4 p5.....p6
...
...
... 
Type_RN  p1 p2 p3 p4 .....p6


 \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2}  , and  \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5}