$ifuseconstvb
出自 DDCC TCAD TOOL Manual
於 2017年8月28日 (一) 14:41 由 Yrwu (對話 | 貢獻) 所做的修訂 (已建立頁面,內容為 "$ifuseconstvb is the command to set up a fixed Schottky barrier. Usually the drain and source barrier is decided by the doping to form a Ohmic contact. However, some...")
$ifuseconstvb is the command to set up a fixed Schottky barrier. Usually the drain and source barrier is decided by the doping to form a Ohmic contact. However, sometime it is not ohmic contact or it is Schottky barrier. So the program can use this command to setup the Schottky barrier. The format is
$ifuseconstvb SB_drain SB_source SB_base SB_vref
For example:
$ifuseconstvb 1.0 0.5 0.3 0.3