"$opertemp" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature For Example: $opertemp 300.0 This means the reference tempera...") |
Jameshuang (對話 | 貢獻) |
||
| 行 1： | 行 1： | ||
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature |
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature |
||
| − | For Example: |
||
| + | '''<big><big>Example</big></big>''' |
||
$opertemp |
$opertemp |
||
於 2017年8月16日 (三) 03:41 的最新修訂
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature
Example
$opertemp 300.0
This means the reference temperature is 300K.
