"$solveRE" 修訂間的差異

出自 DDCC TCAD TOOL Manual
前往: 導覽搜尋
(已建立頁面,內容為 "$solveRE is a command to solve the multimode rate equation. The format is $solveRE rateNum1 tnum dwavefreq_num addREparint(1) ... addREparint(rateNum1) rateNum2 r...")
 
行 3: 行 3:
 
rateNum1 tnum dwavefreq_num addREparint(1) ... addREparint(rateNum1)
 
rateNum1 tnum dwavefreq_num addREparint(1) ... addREparint(rateNum1)
 
rateNum2 ratedt cavW cavH wavelen_center addREparReal(1) ... addREparReal(rateNum2)
 
rateNum2 ratedt cavW cavH wavelen_center addREparReal(1) ... addREparReal(rateNum2)
  +
rateNum1 and rateNum2 is prepared for the future if some input parameter is needed, so it can set 0 for now.<br>
  +
Example:
  +
$solveRE
  +
0 10000001 10
  +
0 1.0e-12 10.0e-6 6.0e-9 1060.0e-9

於 2022年1月25日 (二) 17:23 的修訂

$solveRE is a command to solve the multimode rate equation. The format is

$solveRE
rateNum1 tnum dwavefreq_num addREparint(1) ... addREparint(rateNum1)
rateNum2 ratedt cavW cavH wavelen_center addREparReal(1) ... addREparReal(rateNum2)

rateNum1 and rateNum2 is prepared for the future if some input parameter is needed, so it can set 0 for now.
Example:

$solveRE
0 10000001 10
0 1.0e-12 10.0e-6 6.0e-9 1060.0e-9