$usetaunrbyfunc

出自 DDCC TCAD TOOL Manual
於 2018年4月2日 (一) 09:47 由 Yrwu (對話 | 貢獻) 所做的修訂

前往: 導覽搜尋

$usetaunrbyfunc is to enable the temperature and carrier density dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is

$usetaunrbyfunc
Type_R1  p1 p2 p3 p4 p5.....
Type_R2  p1 p2 p3 p4 p5.....
Type_R3  p1 p2 p3 p4 p5.....
...
...
... 
Type_RN  p1 p2 p3 p4 .....


Type

0: Use the original nonradiative lifetime defined in parameter setions
1:  \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2}  , and  \tau_{p} = \tau_{n} 
2:  \tau_{n} = p1 \times (\frac{T}{p5}) ^{p3}  , and  \tau_{n} = p2 \times (\frac{T}{p5}) ^{p4} 
3:  \tau_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right)  , and  \tau_{p} = \tau_{n} 
4:  \tau_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right)  , and 
    \tau_{p} = p5 +  \left(\frac{P6-P5}{1+(\frac{N_{d}}{p7}) ^{p8}} \right) 


    if (Tautype(region).eq.1) then
        x=me%x(i)
        y=me%y(i)          
        me%taun(i)=taupar(1,region)*( sprst(i)/ taupar(3,region))**taupar(2,region) ! temperature depedent tau
        me%taup(i)=me%taun(i) ! temperature depedent tau
     elseif (Tautype(region).eq.2) then
        x=me%x(i)
        y=me%y(i)          
        me%taun(i)=taupar(1,region)*( sprst(i)/ taupar(5,region))**taupar(3,region) ! temperature depedent tau
        me%taup(i)=taupar(2,region)*( sprst(i)/ taupar(5,region))**taupar(4,region) ! temperature depedent tau
         
     elseif (Tautype(region).eq.3) then   ! doping dependent tau
        me%taun(i)=taupar(1,region)+  (taupar(2,region)-taupar(1,region)) / (1+(par%dope(region)/taupar(3,region))**taupar(4,region))
        me%taup(i)=me%taun(i)
     elseif (Tautype(region).eq.4) then   ! doping dependent tau
        me%taun(i)=taupar(1,region)+  (taupar(2,region)-taupar(1,region)) / (1+(par%dope(region)/taupar(3,region))**taupar(4,region))
        me%taup(i)=taupar(5,region)+  (taupar(6,region)-taupar(1,region)) / (1+(par%dope(region)/taupar(7,region))**taupar(8,region))
     elseif (Tautype(region).eq.13) then   ! doping dependent tau
        temp=taupar(3,region)+  (taupar(4,region)-taupar(1,region)) / (1+(par%dope(region)/taupar(5,region))**taupar(6,region))
        me%taun(i)=temp*( sprst(i)/ taupar(2,region))**taupar(1,region) 
        me%taup(i)=me%taun(i)
        
     end if