檢視 $ElBoundary 的原始碼

Format:
 
  $ElBoundary   
 boundary number
 surface_number(in GMSH) contact_number schottky_adjust_value


For example:

 $ElBoundary                           
 2
 10  4  0.00     
 80  3  0.00    

 


note that: 3 drain 4 sorce 2 gate 21 no current gate



For example2:

 $ElBoundary                           
 2
 10  2  0.00     
 80  2  +/-0.50    

if there were two gate contact with default schottky value is 3.5eV
then, the 10_surface would be 3.5 eV Schottky barrier.
but, the surface of "80" would be 3.0eV or 4.0eV (depends on the sign)


related commands
 [[$schottkyba]], [[$ifelectrode]] , [[$ElBoundary]], [[$extraElBoundary]], [[$extraElBoundaries]]