檢視 $ifapplymuofT 的原始碼

$ifapplymuofT  is to activate temperature dependent mobility. 
The formalism would be
$usemubydopeT  is to enable the temperature and carrier density dependent mobility module with the predefined function. The function is designed for each region. 
So if total n regions is used, then you will need to setup n regions. The format is 

 $ifapplymuofT
 p1 p2 p3 p4 p5.....p6
 p1 p2 p3 p4 p5.....p6
 p1 p2 p3 p4 p5.....p6
 ...
 ...
 ... 
 p1 p2 p3 p4 .....p6


Type 
  <math> \mu_{n} = p1 \times \left(\frac{T}{p3}\right) ^{p2} </math> , and <math> \mu_{p} = p4 \times \left(\frac{T}{p6}\right) ^{p5} </math>
  p1 is the <math> \mu_{n} (300K)  </math>
  p4 is the <math> \mu_{p} (300K)  </math>