檢視 QKD code commands 的原始碼

The meaning of parameters in input.inp file.
= parameters assigned command =

'''@RANDOM_SEED'''<br>
[[@NEED_SEED]] <br>
[[@SEED]] <br>

'''@PATH'''<br>
[[@SEND_FILE_PATH]] <br>

'''@ENGINE'''<br>
[[@PROTOCOL]] <br>
[[@NODE_TYPE]] <br>
[[@PULSES_PER_BURST]] <br>
[[@PULSE_PERIOD]] <br>
[[@BURST_PERIOD]] <br>
[[@OPERATING_TIME]] <br>
[[@FIRE_TIME]] <br>
[[@TIME_UNIT]] <br>
[[@SHAPE_RESOLUTION]] <br>
[[@LAST_DEV_TYPE_2_BOB]] <br>
[[@LAST_DEV_ID_2_BOB]] <br>
[[@EVENT_TRACK_SIZE]] <br>
[[@REG_TIME_UNIT]] <br>
[[@SEC_UNIT]] <br>
[[@MAX_ROUTE_NUM]] <br>
[[@MAX_ROUTINE_NUM]] <br>
[[@PT_SIZE]] <br>
[[@EPOCH_STORAGE_SIZE]] <br>
[[@BATCH_SIZE]] <br>

'''@DEVICEMAP'''<br>
[[@PORTPAIR_NUM]] <br>
[[@REFLECTION_SW]] <br>
[[@PATH_TRACK_NUM]] <br>
[[@PORTPAIR]] <br>

'''@CTRLER'''<br>
[[@CTRLER_NUM]] <br>

'''@CTRL_INFO'''<br>
[[@CTRL_INFO_NUM]] <br>
[[@INFO]] <br>

'''@CTRL_FUNC'''<br>
Being used while [[@INFO]] LASER method is 2 (decoy method). Sending photon with different MPN.<br>
[[@DECOY_PARAMS]] <br>
[[@PM_CONST_MODE_SW]] <br>
[[@PM_CONST_MODE]] <br>

'''@NODE'''<br>
[[@WAVELENGTH_DETAIL]] <br>
[[@ORIENTATION_DETAIL]] <br>
[[@ELLIPTICITY_DETAIL]] <br>
[[@BORN_TIME_DETAIL]] <br>
[[@PHASE_DETAIL]] <br>
[[@INTENSITY_DETAIL]] <br>
[[@INTENSITY_SI_DETAIL]] <br>
[[@INTENSITY_SI_SEQ_DETAIL]] <br>
[[@PHASE_SI_DETAIL]] <br>
[[@PHASE_SI_SEQ_DETAIL]] <br>
[[@FFT_DETAIL]] <br>

'''@LASER'''<br>
[[@LASER_NUM]] <br>
[[@DEV_ID  (LASER)]] <br>
[[@DELAY_TIME  (LASER)]] <br>
[[@PERIOD]] <br>
[[@WAVELENGTH]] <br>
[[@INSERTION_LOSS]] <br>
[[@MODE]] <br>
[[@CONST_PHOTON_NUM]] <br>
[[@MPN]] <br>
[[@ETERNITY]] <br>
[[@EMIT_PULSE_TIME_SW]] <br>
[[@PHOTON_SHAPE (LASER)]] <br>
[[@SHAPE_WIDTH (LASER)]] <br>
[[@PULSE_WIDTH (LASER)]] <br>
[[@MEAN (LASER)]] <br>
[[@HEIGHT (LASER)]] <br>
[[@IS_NORMALIZE]] <br>
[[@IS_ABS]] <br>
[[@IS_OFFSET]] <br>
[[@RISE_TIME (LASER)]] <br>
[[@FALL_TIME (LASER)]] <br>
[[@SIG]] <br>
[[@HEIGHT_PROP]] <br>
[[@FFT_SW]] <br>
[[@FFT_FILE]] <br>

'''@FIBER'''<br>
[[@FIBER_NUM]] <br>
[[@DEV_ID  (FIBER)]] <br>
[[@DELAY_TIME  (FIBER)]] <br>
[[@TOT_LOSS]] <br>
[[@LOSS]] <br>
[[@LENGTH]] <br>
[[@INSERTION_LOSS]] <br>

'''@BS'''<br>
[[@BS_NUM]] <br>
[[@DEV_ID  (BS)]] <br>
[[@DELAY_TIME  (BS)]] <br>
[[@TRANSMITTANCE]] <br>
[[@INSERTION_LOSS]] <br>

'''@PM'''<br>
[[@PM_NUM]] <br>
[[@DEV_ID  (PM)]] <br>
[[@DELAY_TIME  (PM)]] <br>
[[@FIRST_PHASE]] <br>
[[@INSERTION_LOSS]] <br>
[[@PHOTON_SHAPE (PM)]] <br>
[[@SHAPE_WIDTH (PM)]] <br>
[[@PULSE_WIDTH (PM)]] <br>
[[@MEAN (PM)]] <br>
[[@HEIGHT (PM)]] <br>
[[@IS_NORMALIZE]] <br>
[[@IS_ABS]] <br>
[[@IS_OFFSET]] <br>
[[@RISE_TIME (PM)]] <br>
[[@FALL_TIME (PM)]] <br>
[[@SIG]] <br>
[[@HEIGHT_PROP]] <br>
[[@FFT_SW]] <br>
[[@FFT_FILE]] <br>

'''@MZI'''<br>
[[@MZI_NUM]] <br>
[[@DEV_ID  (MZI)]] <br>
[[@DELAY_TIME1]] <br>
[[@DELAY_TIME2]] <br>
[[@DELAY_PERIOD_SW]] <br>
[[@DELAY_PERIOD_NUM]] <br>
[[@Ts]] <br>
[[@Tp]] <br>
[[@Rs]] <br>
[[@Rp]] <br>
[[@PHASE_SHIFT]] <br>
[[@VISIBILITY]] <br>
[[@INSERTION_LOSS]] <br>
[[@LOSS_RATIO]] <br>

'''@SPD'''<br>
[[@SPD_NUM]] <br>
[[@DEV_ID  (SPD)]] <br>
[[@DELAY_TIME  (SPD)]] <br>
[[@DARK_COUNT_RATE]] <br>
[[@TIME_WINDOW_WIDTH]] <br>
[[@EFFICIENCY]] <br>
[[@IS_PARALYZABLE]] <br>
[[@DEAD_TIME]] <br>
[[@EVENT_REDUCTION_RATE]] <br>
[[@AFTERPULSING_PROB]] <br>
[[@INSERTION_LOSS]] <br>
[[@DETECTION_SW]] <br>