檢視 2D Vpit LED View the results 的原始碼

'''● Press the result viewer button<br><br>'''
[[File:2D_Vpit LED_48.png|1000px]]<br><br>

'''● 2D Result SOP<br>'''
1. Choose the project name<br>
2. Choose the data type<br>
 (1)  IV And IQE (Usually Use)
 (2)  2D Node-Base Data (Usually Use)
 (3)  2D Element-Base Data
 (4)  2D Ray Tracing
 (5)  2D Triangular Mesh
 (6)  2D Node Parameter Check (Usually Use)
 (7)  2D Element Parameter Check
 (8)  2D Nsum Data
 (9)  2D Eigen Wave
 (10) 2D RCWA 
3. Choose the x-axis and y-axis data<br>
4. Choose the figure type <br>
 (1)  x-y plot
 (2)  2D triangular mesh
      (a) Plot the complete data for both the x-axis and y-axis
      (b) Plot along the y-axis at a fixed x-point
      (c) Plot along the x-axis at a fixed y-point
 (3)  3D triangular mesh
5. Hold on (if necessary)<br>
6. Plot<br>
Notice: Remember to normalize the 2D current density by the chip width (cm) when plotting current data.<br><br>

★★★ There are some result examples for this case. ★★★<br><br>
'''● IV figure (linear)<br><br>'''
[[File:2D_Vpit LED_49.png|1000px]]<br><br>

'''● Band structure figure <br><br>'''
★ Ec (along y-axis) <br><br>
[[File:2D_Vpit LED_51.png|1000px]]<br><br>

★ Use "hold on" to plot different x-point along the y-axis <br><br>
[[File:2D_Vpit LED_52.png|1000px]]<br><br>

★ Use "hold on" to plot Ec and Efn in the same figure (along y-axis) <br><br>
[[File:2D_Vpit LED_61.png|1000px]]<br><br>
[[File:2D_Vpit LED_62.png|1000px]]<br><br>

'''● Radiative Rates figure (along y-axis) <br><br>'''
[[File:2D_Vpit LED_57.png|1000px]]<br><br>

'''● Carreir Density figure (along y-axis) <br><br>'''
★ n density <br><br>
[[File:2D_Vpit LED_60.png|1000px]]<br><br>

'''● 2D Current Density figure <br><br>'''
★ Jn <br><br>
[[File:2D_Vpit LED_59.png|1000px]]<br><br>
★ Jp <br><br>
[[File:2D_Vpit LED_58.png|1000px]]<br><br>

'''● 2D Band Structure figure <br><br>'''
★ Ec <br><br>
[[File:2D_Vpit LED_50.png|1000px]]<br><br>

'''● 2D Radiative Rates figure <br><br>'''
★ Radiative recombination at different voltages <br><br>
[[File:2D_Vpit LED_55.png|1000px]]<br><br>
[[File:2D_Vpit LED_56.png|1000px]]<br><br>

'''● 2D Nonradiative Rates figure <br><br>'''
[[File:2D_Vpit LED_63.png|1000px]]<br><br>

'''● 2D Carrier Density figure <br><br>'''
★ n <br><br>
[[File:2D_Vpit LED_53.png|1000px]]<br><br>
★ p <br><br>
[[File:2D_Vpit LED_54.png|1000px]]<br><br>


'''● Parameter Check <br><br>'''
You can check whether the different parameters are set correctly.<br>
Ex: region number, Eg, dope, effective mass, impurity, taun(nonrad), taup(nonrad)... <br><br>
★ Eg <br><br>
[[File:2D_Vpit LED_64.png|1000px]]<br><br>
★ Dope <br><br>
[[File:2D_Vpit LED_65.png|1000px]]<br><br>