檢視 $basebias 的原始碼

$basebias is to determine the additional bias in the simulation.

It is similar to the [[$sourcebias]], where is a fixed value is used. This is for the system that has 4 or more contacts. 

For example 
 $basebias
 0.1 

This means that the bias of the base contact is at 0.1V.

<br>'''<big><big>The $basebias setting in GUI interface is here</big></big>''' <br>
Press '''Contact Setting''' and fill in the field for the '''V-base''', remember to check the box below!<br>
[[檔案:2D_basebias_fig1.jpg|1200px]]