檢視 $gmshlineboundary 的原始碼

This is functional when the input file is a .msh file generated by gmesh . List the surface numbers in the Gmesh file. The parameters setting is related to each surface in sequence.

<big>'''<big>Format</big>'''</big>

 $gmshlineboundary
 n
 line_number type
 line_number type
 line_number type

'''<big><big>Parameter Explanation</big></big>'''
 line_number : The line number where to put the contact.
 type : The corresponding contact type. 21 gate contact. 3 source contact. 4 drain contact.

'''<big><big>Example</big></big>'''
 $gmshlineboundary
 6 
 35 21
 36 21
 37 21

<br>'''<big><big>The $gmshlineboundary setting in GUI interface is here</big></big>''' <br>
Here's an example of a Gmsh file created for the MOS. The gray dots and blue lines represent the points and lines from the Gmsh file.<br>
The gray box shows the area where doping is assumed, and the red lines are meant to be used as linear contact lines.<br>
[[檔案:2D_gmshlineboundary_fig1.jpg|1200px]]<br><br>
1. Press '''Additional Functions'''.<br>
2. Load a Gmsh as process like [[$gmshsurfparameter]].<br>
3. Press '''Set Contact from the Gmsh File'''.<br>
4. Please set up the fields as needed!<br>
[[檔案:2D_gmshlineboundary_fig2.jpg|1200px]]<br><br>
5. Here are the Gmsh lines selected as contacts, and the number of contacts is displayed below.<br>
[[檔案:2D_gmshlineboundary_fig3.jpg|1200px]]<br>