檢視 $ifapplytauofT 的原始碼

$ifapplytauofT is to enable the temperature-dependent nonradiative lifetime module with the predefined function. The function is designed for each region. 
So if total n regions are used, then you will need to set up n regions. The format is 

 $ifapplytauofT
 p1 p2 p3 p4 p5.....p6
 p1 p2 p3 p4 p5.....p6
 p1 p2 p3 p4 p5.....p6
 ...
 ...
 ... 
 p1 p2 p3 p4 .....p6


 <math> \tau_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \tau_{p} = p4 \times (\frac{T}{p6}) ^{p5} </math>


The related commands are:  [[$ifapplytauofT]], [[$ifapplymuofT]], [[$ifapplyEgofT]], [[$ifTversusJ]]