檢視 $useassignedbiasstep 的原始碼

$useassignedbiasstep is the function to assign exact voltage for each step. The command will be withing Vg switch and Vd switch. I would suggest to 
make vgstep and vdstep =0.0  and Vdstart=Vdfinal Vgstart =Vg final if this command is used. 

 $useassignedbiasstep
 5                 ! total bias steps
 0.0  0.0  0.0       ! Vg=0.0  Vd=0.0  Vs=0.0 for the first step
 0.1  0.0  0.0       ! Vg=0.1  Vd=0.0  Vs=0.0 for the 2nd step  
 0.2  0.0  0.0       ! Vg=0.2  Vd=0.0  Vs=0.0 for the 3rd step
 0.2  0.1  0.0       ! Vg=0.2  Vd=0.1  Vs=0.0 for the 4th step
 0.2  0.3  0.0       ! Vg=0.2  Vd=0.3  Vs=0.0 for the 5th  step

Examples for HENT <br>

 $useassignedbiasstep
 20                 ! total bias steps
 0.0  0.0  0.0        1
 0.5  0.0  0.0        2
 1.0  0.0  0.0        3
 1.0  1.0  0.0        4
 1.0  2.0  0.0        5
 1.0  3.0  0.0        6
 1.0  4.0  0.0        7
 1.0  5.0  0.0        8 
 1.0  6.0  0.0        9
 1.0  7.0  0.0        10
 1.0  8.0  0.0        11    
 1.0  9.0  0.0        12    
 1.0  10.0  0.0       13    
 2.0  12.0  0.0       14 
 3.0  13.0  0.0       15   
 4.0  14.0  0.0       16    
 5.0  15.0  0.0       17     
 6.0  16.0  0.0       18   
 7.0  17.0  0.0       19 
 8.0  18.0  0.0       20