"$addbiascontact" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$addbiascontact is a command to provide extra fixed bias contact. The command is as following $addbiascontact N type1 Bias1 barrier1 type2 Bi...") |
|||
| (未顯示同一使用者於中間所作的 3 次修訂) | |||
| 行 3： | 行 3： | ||
$addbiascontact |
$addbiascontact |
||
N |
N |
||
| − | type1 Bias1 barrier1 |
+ | Surface_num type1 Bias1 barrier1 |
| − | type2 Bias2 barrier2 |
+ | Surface_num type2 Bias2 barrier2 |
... |
... |
||
| − | typeN BiasN barrierN |
+ | Surface_num typeN BiasN barrierN |
| + | Surface_num : is the surface number of gmsh's msh |
||
Type = 1: Schotkky barrier, Provide Schottky barrier related to Ec |
Type = 1: Schotkky barrier, Provide Schottky barrier related to Ec |
||
Type = 2: Schotkky barrier but us affinity , Provide the metal workfunc |
Type = 2: Schotkky barrier but us affinity , Provide the metal workfunc |
||
| − | Type = 3: barrier decided by dopant density ( doping density should not be zero) |
||
| + | |||
Bias : The applied bias |
Bias : The applied bias |
||
barrier : The Schotkky barrier (or work function) depending on type 1 or 2 |
barrier : The Schotkky barrier (or work function) depending on type 1 or 2 |
||
| + | |||
| + | |||
| + | For example |
||
| + | |||
| + | |||
| + | $addbiascontact |
||
| + | 2 |
||
| + | 10 1 2.0 1.2 |
||
| + | 211 2 3.0 4.3 (4.3 is the electron affinity) |
||
| + | |||
| + | Note: if type == 2, the function [[$affinity (3D)]] should be activated |
||
於 2018年12月19日 (三) 10:25 的最新修訂
$addbiascontact is a command to provide extra fixed bias contact. The command is as following
$addbiascontact N Surface_num type1 Bias1 barrier1 Surface_num type2 Bias2 barrier2 ... Surface_num typeN BiasN barrierN Surface_num : is the surface number of gmsh's msh
Type = 1: Schotkky barrier, Provide Schottky barrier related to Ec Type = 2: Schotkky barrier but us affinity , Provide the metal workfunc
Bias : The applied bias barrier : The Schotkky barrier (or work function) depending on type 1 or 2
For example
$addbiascontact 2 10 1 2.0 1.2 211 2 3.0 4.3 (4.3 is the electron affinity)
Note: if type == 2, the function $affinity (3D) should be activated
