「*.ivn」:修訂間差異

出自DDCC TCAD TOOL Manual
跳至導覽 跳至搜尋
Jameshuang留言 | 貢獻
已建立頁面,內容為 "outfile vg phib error leftj rightj tunnel-jn tunnel-jp electron_i_at_top hole_i_at_top electron_i_at_buttom hole_i_at_buttom"
 
Jameshuang留言 | 貢獻
無編輯摘要
第1行: 第1行:
outfile vg phib error leftj rightj tunnel-jn tunnel-jp electron_i_at_top hole_i_at_top electron_i_at_buttom hole_i_at_buttom
Output current file.
 
<big>'''<big>Format</big>'''</big>
 
 
 
<math>V_g</math> <math>IQE</math> <math>Error</math> <math>J_{left}</math> <math>J_{right}</math> <math>J_{e_{tunnel}}</math> <math>J_{h_{tunnel}}</math> <math>J_{n_{left}}</math> <math>J_{p_{left}}</math> <math>J_{n_{right}}</math> <math>J_{p_{right}}</math> <math>J_{rad}</math> <math>J_{non}</math> <math>J_{auger}</math> 
 
 
 
<big><big>'''Parameter Explanation'''</big></big>
 
 
<math>V_g</math> : Applied Voltage. <math>(V)</math>
 
<math>IQE</math> : Internal quantum efficiency.
 
<math>Error</math> : Convergence of this biasing point. Should be less than 1.e-4 at least.
 
<math>J_{left}</math> :Current flows in/out at left side. <math>(Acm^{-2})</math>
 
<math>J_{right}</math> : Current flows in/out at right side.<math>(Acm^{-2})</math>
 
<math>J_{e_{tunnel}}</math> : Tunneling current  (go with $calltunnel).<math>(Acm^{-2})</math>
 
<math>J_{h_{tunnel}}</math> : Hole tunneling current.<math>(Acm^{-2})</math>
 
<math>J_{n_{left}}</math> : Electron current flow into the left contact.<math>(Acm^{-2})</math>
 
<math>J_{p_{left}}</math> : Hole current flows into the right contact.<math>(Acm^{-2})</math>
 
<math>J_{n_{right}}</math> : Electron current flow into the left contact.<math>(Acm^{-2})</math>
 
<math>J_{p_{right}}</math> : Hole current flows into the right contact.<math>(Acm^{-2})</math>
 
<math>J_{rad}</math> : Radiative recombination current.<math>(Acm^{-2})</math>
 
<math>J_{non}</math> : Non-radiative recombination current.<math>(Acm^{-2})</math>
 
<math>J_{auger}</math> : Auger current.<math>(Acm^{-2})</math>

於 2017年8月16日 (三) 12:06 的修訂

Output current file.

Format


Vg IQE Error Jleft Jright Jetunnel Jhtunnel Jnleft Jpleft Jnright Jpright Jrad Jnon Jauger 



Parameter Explanation


Vg : Applied Voltage. (V)

IQE : Internal quantum efficiency.

Error : Convergence of this biasing point. Should be less than 1.e-4 at least.

Jleft :Current flows in/out at left side. (Acm2)

Jright : Current flows in/out at right side.(Acm2)

Jetunnel : Tunneling current (go with $calltunnel).(Acm2)

Jhtunnel : Hole tunneling current.(Acm2)

Jnleft : Electron current flow into the left contact.(Acm2)

Jpleft : Hole current flows into the right contact.(Acm2)

Jnright : Electron current flow into the left contact.(Acm2)

Jpright : Hole current flows into the right contact.(Acm2)

Jrad : Radiative recombination current.(Acm2)

Jnon : Non-radiative recombination current.(Acm2)

Jauger : Auger current.(Acm2)