"$RCWAxnode" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| 行 1： | 行 1： | ||
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in [[$RCWAxdiv]]. It also needs to goes with the [[$RCWAxdiv]] and [[$RCWAperiod]] to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period. |
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in [[$RCWAxdiv]]. It also needs to goes with the [[$RCWAxdiv]] and [[$RCWAperiod]] to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period. |
||
| + | $RCWAxnode<br> |
||
| + | 3 |
||
| + | 3 |
||
| + | 3 |
||
| + | 3 |
||
| + | 3 |
||
| + | ... |
||
| + | total layer |
||
於 2020年6月16日 (二) 10:23 的修訂
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in $RCWAxdiv. It also needs to goes with the $RCWAxdiv and $RCWAperiod to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period.
$RCWAxnode
3 3 3 3 3 ... total layer
