"$RandomizedR" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| 行 11： | 行 11： | ||
Method=0 fully random number |
Method=0 fully random number |
||
Method=1 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn |
Method=1 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn |
||
| + | Method=2 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn |
||
| + | The difference between 1 and 2 are Method 2 will not replace the trap related coefficents, nonradiative lifetime, doping, impurity, and generation of the original region. |
||
| + | |||
Example: |
Example: |
||
| 行 17： | 行 20： | ||
$RandomizedR |
$RandomizedR |
||
| − | + | 6 1 20 -10 |
|
13 14 15 16 17 18 19 20 21 22 23 .... 32 |
13 14 15 16 17 18 19 20 21 22 23 .... 32 |
||
3 0 （QW location) |
3 0 （QW location) |
||
| 行 24： | 行 27： | ||
9 0 |
9 0 |
||
11 1 2e-4 15 6.8e-4 0.01 0.02 |
11 1 2e-4 15 6.8e-4 0.01 0.02 |
||
| + | 13 2 2e-4 15 6.8e-4 0.01 0.02 # use the original lifetime, doping, , impurity, traps, and generation of the original region. |
||
於 2022年5月24日 (二) 22:27 的修訂
$RandomizedR is a special command to setup the random alloy structures. The format is
$RandomizedR Region_Number_used Random_type location_N_used seeding_num location_1 location_2 ...... location_N Region_1 method P1 P2 P3 P4 P5 .... Region_2 method P1 P2 P3 P4 P5 .... ... Region_N method P1 P2 P3 P4 P5 ....
Method=0 fully random number Method=1 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn Method=2 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn
The difference between 1 and 2 are Method 2 will not replace the trap related coefficents, nonradiative lifetime, doping, impurity, and generation of the original region.
Example:
$RandomizedR 6 1 20 -10 13 14 15 16 17 18 19 20 21 22 23 .... 32 3 0 （QW location) 5 0 7 0 9 0 11 1 2e-4 15 6.8e-4 0.01 0.02 13 2 2e-4 15 6.8e-4 0.01 0.02 # use the original lifetime, doping, , impurity, traps, and generation of the original region.
