"$triregionnumber" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) (已建立頁面，內容為 "The number of regions that is in the triangular shape. <big><big>'''Example'''</big></big> $triregionnumber 2 This means that there are two triangular regions.") |
|||
| 行 6： | 行 6： | ||
2 |
2 |
||
| − | This means that there are two triangular regions. |
+ | This means that there are two triangular regions. This command must be set after the command |
| + | [[$ranges]]. The "triregionnumber" must be smaller than the "range number". <br> |
||
| + | |||
| + | This command needs to be set before the command |
||
| + | before the commands [[$triregiontype]], [[$triranges]], |
||
| + | |||
| + | For example: <br> |
||
| + | |||
| + | $triregionnumber |
||
| + | 2 |
||
| + | $triregiontype |
||
| + | @type @periodnumber @period_spacing |
||
| + | @type @periodnumber @period_spacing |
||
| + | $triranges |
||
| + | @x1 @y1 @x2 @y2 @x3 @y3 |
||
| + | @x1 @y1 @x2 @y2 @x3 @y3 |
||
於 2017年8月21日 (一) 17:07 的修訂
The number of regions that is in the triangular shape.
Example
$triregionnumber 2
This means that there are two triangular regions. This command must be set after the command
$ranges. The "triregionnumber" must be smaller than the "range number".
This command needs to be set before the command before the commands $triregiontype, $triranges,
For example:
$triregionnumber 2 $triregiontype @type @periodnumber @period_spacing @type @periodnumber @period_spacing $triranges @x1 @y1 @x2 @y2 @x3 @y3 @x1 @y1 @x2 @y2 @x3 @y3
