"$opertemp" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature For Example: $opertemp 300.0 This means the reference tempera...") |
|||
| (未顯示由 2 位使用者於中間所作的 8 次修訂) | |||
| 行 1： | 行 1： | ||
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature |
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature |
||
| − | For Example: |
||
| + | '''<big><big>Example</big></big>''' |
||
$opertemp |
$opertemp |
||
| 行 7： | 行 7： | ||
This means the reference temperature is 300K. |
This means the reference temperature is 300K. |
||
| + | |||
| + | <big>'''The $opertemp setting for 1D-DDCC in GUI interface '''</big> <br> |
||
| + | |||
| + | [[檔案:1d_$opertemp_fig1.jpg|1300px]] |
||
| + | |||
| + | |||
| + | <big>'''The $opertemp setting for 2D-DDCC in GUI interface '''</big> <br> |
||
| + | Press '''Contact Setting''' and fill in the field for the '''Temperature(K)'''!<br> |
||
| + | [[檔案:2D_opertemp_fig1.jpg|1200px]]<br> |
||
於 2024年9月24日 (二) 21:57 的最新修訂
$opertemp is the reference temperature in the program. Usually it is set as Ambient temperature
Example
$opertemp 300.0
This means the reference temperature is 300K.
The $opertemp setting for 1D-DDCC in GUI interface
The $opertemp setting for 2D-DDCC in GUI interface
Press Contact Setting and fill in the field for the Temperature(K)!
