$ygradualdiv

This function is to determine how the segment is divided. There are two columns to fill in. The first column i should be filled in an integer 0, 1, or 2.

i = 0:	Uniform. This means the segment is divided equally with the same spacing.
i = 1:	Gradual. This means the segment is divided whether from small spacing to large spacing or in the opposite way. The spacing is distributed like a geometric progression
i = 2:	Bump. This means the segment can be divided into two forms small-large-small or large-small-large.

The second column r should be filled in a real number.

	If r < 1	If r = 1	If r > 1
Uniform (0)	uniform	uniform	uniform
Gradual (1)	large -> small	uniform	small -> large
Bump (2)	large -> small -> large	uniform	small -> large -> small

If the total layer thickness is $l$ and i=1, then if the smallest separation distance is a 
$l=a+ar+a{r}^2+a{r}^3+a{r}^4+...+a{r}^N$
where N is the total grid number defined in $ydiv
Then   $l=a\frac{r^N-1}{r-1}$

If the total layer thickness is $l$ and i=2, then if the smallest separation distance is a 
$l/2=a+ar+a{r}^2+a{r}^3+a{r}^4+...+a{r}^{N/2}$
where N is the total grid number defined in $ydiv
Then   $l=2\cdot a\frac{r^{N/2}-1}{r-1}$

Example

$ynode
0.0
0.5
2.0
3.0

$ydiv
25
30
60

$ygradualdiv
0
1 1.1
2 0.9

The $ygradualdiv setting in GUI interface is here
1. After setting up the Y-nodes, press Edit the nodes.
2. Choose the 1^st node and set the Method to Uniform with a Mesh ratio of 0.00.


3. Choose the 2^nd node and set the Method to Gradual change with a Mesh ratio of 1.10.


4. Choose the 3^rd node and set the Method to Bump with a Mesh ratio of 0.90.

Related commands

$xgradualdiv,$ynode,$ydiv