"$xnode" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| (未顯示由 3 位使用者於中間所作的 11 次修訂) | |||
| 行 1： | 行 1： | ||
| − | The x-coordinate for each ''x'' node. The number of rows depends on the function [[$xsecysecmaxob]]. |
+ | The x-coordinate for each ''x'' node. The number of rows (''n'') depends on the function [[$xsecysecmaxob]]. |
* '''Unit: μm''' |
* '''Unit: μm''' |
||
| − | + | <br><br> |
|
; Format: |
; Format: |
||
$xnode |
$xnode |
||
| − | ''x |
+ | ''x<sub>1</sub>'' |
| − | ''x |
+ | ''x<sub>2</sub>'' |
. |
. |
||
. |
. |
||
. |
. |
||
| − | ''x |
+ | ''x<sub>n</sub>'' |
| − | + | <br><br> |
|
| + | ; Example: |
||
| + | $xsecysecmaxob |
||
| + | <span style="color:red">'''3'''</span> 5 2 <br> |
||
| + | $xnode |
||
| + | 0.0000 |
||
| + | 1.1000 |
||
| + | 10.0000 |
||
| + | It means the 1<sup>st</sup> x-point is at 0.0 (μm); the 2<sup>nd</sup> is at 1.1 (μm); and the last is at 10.0 (μm). |
||
| + | |||
| + | |||
| + | <br>'''<big><big>The $xnode setting in GUI interface is here</big></big>''' <br> |
||
| + | 1. Press '''Mesh Setting''' and choose '''Manual mesh'''.<br> |
||
| + | 2. Choose '''X-node point''' and set the 1<sup>st</sup> X-point to 0.0 (μm).<br> |
||
| + | [[檔案:2D_xnode_fig1.jpg|1200px]]<br><br> |
||
| + | 3. Continue set the 2<sup>nd</sup> X-point to 1.1 (μm).<br> |
||
| + | [[檔案:2D_xnode_fig2.jpg|1200px]]<br><br> |
||
| + | 4. Continue set the last X-point to 10.0 (μm).<br> |
||
| + | [[檔案:2D_xnode_fig3.jpg|1200px]]<br><br> |
||
| + | 5. Get 3 X-nodes!<br> |
||
| + | [[檔案:2D_xnode_fig4.jpg|1200px]]<br><br> |
||
| + | |||
| + | <br><br> |
||
; Related commands |
; Related commands |
||
| − | : [[$ |
+ | : [[$xnode]], [[$ynode]], [[$xd]], [[$xdiv]], [[$xgradualdiv]], [[$ygradualdiv]], [[$ydiv]],[[$ynode]] |
於 2024年10月27日 (日) 02:13 的最新修訂
The x-coordinate for each x node. The number of rows (n) depends on the function $xsecysecmaxob.
- Unit: μm
- Format
$xnode x1 x2 . . . xn
- Example
$xsecysecmaxob
3 5 2
$xnode
0.0000
1.1000
10.0000
It means the 1st x-point is at 0.0 (μm); the 2nd is at 1.1 (μm); and the last is at 10.0 (μm).
The $xnode setting in GUI interface is here
1. Press Mesh Setting and choose Manual mesh.
2. Choose X-node point and set the 1st X-point to 0.0 (μm).
3. Continue set the 2nd X-point to 1.1 (μm).
4. Continue set the last X-point to 10.0 (μm).
5. Get 3 X-nodes!
- Related commands
- $xnode, $ynode, $xd, $xdiv, $xgradualdiv, $ygradualdiv, $ydiv,$ynode
