「$xnode」：修訂間差異
跳至導覽
跳至搜尋
無編輯摘要 |
無編輯摘要 |
||
| （未顯示由 3 位使用者於中間所作的 9 次修訂） | |||
| 第1行： | 第1行： | ||
The x-coordinate for each ''x'' node. The number of rows depends on the function [[$xsecysecmaxob]]. | The x-coordinate for each ''x'' node. The number of rows (''n'') depends on the function [[$xsecysecmaxob]]. | ||
* '''Unit: μm''' | * '''Unit: μm''' | ||
<br><br> | <br><br> | ||
; Format: | ; Format: | ||
$xnode | $xnode | ||
''x | ''x<sub>1</sub>'' | ||
''x | ''x<sub>2</sub>'' | ||
. | . | ||
. | . | ||
. | . | ||
''x<sub>n</sub>'' | ''x<sub>n</sub>'' | ||
<br><br> | |||
; Example: | |||
$xsecysecmaxob | |||
<span style="color:red">'''3'''</span> 5 2 <br> | |||
$xnode | |||
0.0000 | |||
1.1000 | |||
10.0000 | |||
It means the 1<sup>st</sup> x-point is at 0.0 (μm); the 2<sup>nd</sup> is at 1.1 (μm); and the last is at 10.0 (μm). | |||
<br>'''<big><big>The $xnode setting in GUI interface is here</big></big>''' <br> | |||
1. Press '''Mesh Setting''' and choose '''Manual mesh'''.<br> | |||
2. Choose '''X-node point''' and set the 1<sup>st</sup> X-point to 0.0 (μm).<br> | |||
[[檔案:2D_xnode_fig1.jpg|1200px]]<br><br> | |||
3. Continue set the 2<sup>nd</sup> X-point to 1.1 (μm).<br> | |||
[[檔案:2D_xnode_fig2.jpg|1200px]]<br><br> | |||
4. Continue set the last X-point to 10.0 (μm).<br> | |||
[[檔案:2D_xnode_fig3.jpg|1200px]]<br><br> | |||
5. Get 3 X-nodes!<br> | |||
[[檔案:2D_xnode_fig4.jpg|1200px]]<br><br> | |||
<br><br> | <br><br> | ||
; Related commands | ; Related commands | ||
: [[$ | : [[$xnode]], [[$ynode]], [[$xd]], [[$xdiv]], [[$xgradualdiv]], [[$ygradualdiv]], [[$ydiv]],[[$ynode]] | ||
於 2024年10月26日 (六) 18:13 的最新修訂
The x-coordinate for each x node. The number of rows (n) depends on the function $xsecysecmaxob.
- Unit: μm
- Format
$xnode x1 x2 . . . xn
- Example
$xsecysecmaxob
3 5 2
$xnode
0.0000
1.1000
10.0000
It means the 1st x-point is at 0.0 (μm); the 2nd is at 1.1 (μm); and the last is at 10.0 (μm).
The $xnode setting in GUI interface is here
1. Press Mesh Setting and choose Manual mesh.
2. Choose X-node point and set the 1st X-point to 0.0 (μm).
3. Continue set the 2nd X-point to 1.1 (μm).
4. Continue set the last X-point to 10.0 (μm).
5. Get 3 X-nodes!
- Related commands
- $xnode, $ynode, $xd, $xdiv, $xgradualdiv, $ygradualdiv, $ydiv,$ynode