"$usetaunrbyfunc" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| 行 19： | 行 19： | ||
4: <math> \tau_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \tau_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) </math> |
4: <math> \tau_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \tau_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) </math> |
||
13: <math> \tau_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\tau_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math> |
13: <math> \tau_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\tau_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math> |
||
| + | 24: <math> \tau_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\tau_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and |
||
| + | <math> \tau_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{d}}{p9}) ^{p10}} \right) </math>, <math>\tau_{p} = \tau_{p,0} \times (\frac{T}{p11}) ^{p12} </math>. |
||
於 2018年4月2日 (一) 10:05 的修訂
$usetaunrbyfunc is to enable the temperature and carrier density dependent nonradiative lifetime module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is
$usetaunrbyfunc Type_R1 p1 p2 p3 p4 p5..... Type_R2 p1 p2 p3 p4 p5..... Type_R3 p1 p2 p3 p4 p5..... ... ... ... Type_RN p1 p2 p3 p4 .....
Type
0: Use the original nonradiative lifetime defined in parameter setions 1:, and
2:
, and
3:
, and
13:
,
, and
,
.
