"$usemubydopeT" 修訂間的差異

出自 DDCC TCAD TOOL Manual
前往： 導覽、 搜尋
行 14： 行 14：
 
Type
 
Type
 
0: Use the original nonradiative lifetime defined in parameter setions
  
0: Use the original nonradiative lifetime defined in parameter setions
−
1: <math> \mu_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \mu_{p} = \m_{n} </math>
 +
1: <math> \mu_{n} = p1 \times (\frac{T}{p3}) ^{p2} </math> , and <math> \mu_{p} = \mu_{n} </math>
−
2: <math> \m_{n} = p1 \times (\frac{T}{p5}) ^{p3} </math> , and <math> \mu_{n} = p2 \times (\frac{T}{p5}) ^{p4} </math>
 +
2: <math> \mu_{n} = p1 \times (\frac{T}{p5}) ^{p3} </math> , and <math> \mu_{n} = p2 \times (\frac{T}{p5}) ^{p4} </math>
−
3: <math> \m_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \tau_{n} </math>
 +
3: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \tau_{n} </math>
−
4: <math> \m_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) </math>
 +
4: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) </math>
−
13: <math> \m_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math>
 +
13: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math>
−
24: <math> \m_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and
+
24: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and
−
<math> \m_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{d}}{p9}) ^{p10}} \right) </math>, <math>\mu_{p} = \tau_{p,0} \times (\frac{T}{p11}) ^{p12} </math>.
 +
<math> \mu_{p,0} = p7 + \left(\frac{P8-P7}{1+(\frac{N_{d}}{p9}) ^{p10}} \right) </math>, <math>\mu_{p} = \tau_{p,0} \times (\frac{T}{p11}) ^{p12} </math>.
   
 
If the mobility is for activated dopant density then
  
If the mobility is for activated dopant density then
   
 
31: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \mu_{n} </math>
  
31: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = \mu_{n} </math>
−
41: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}^{-1}}{p7}) ^{p8}} \right) </math>
 +
41: <math> \mu_{n} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math> , and <math> \mu_{p} = p5 + \left(\frac{P6-P5}{1+(\frac{N_{a}^{-}}{p7}) ^{p8}} \right) </math>
 
131: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math>
  
131: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and <math> \tau_{p} = \tau_{n} </math>
 
241: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and
 
241: <math> \mu_{n,0} = p1 + \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) </math>, <math>\mu_{n} = \mu_{n,0} \times (\frac{T}{p5}) ^{p6} </math> , and

於 2018年5月23日 (三) 10:21 的修訂

$usemubydopeT is to enable the temperature and carrier density dependent mobility module with the predefined function. The function is designed for each region. So if total n regions is used, then you will need to setup n regions. The format is 

$usemubydopeT
Type_R1  p1 p2 p3 p4 p5.....p12
Type_R2  p1 p2 p3 p4 p5.....p12
Type_R3  p1 p2 p3 p4 p5.....p12
...
...
... 
Type_RN  p1 p2 p3 p4 .....p12


Type 

0: Use the original nonradiative lifetime defined in parameter setions
1:  \mu_{n} = p1 \times (\frac{T}{p3}) ^{p2}  , and  \mu_{p} = \mu_{n} 
2:  \mu_{n} = p1 \times (\frac{T}{p5}) ^{p3}  , and  \mu_{n} = p2 \times (\frac{T}{p5}) ^{p4} 
3:  \mu_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right)  , and  \mu_{p} = \tau_{n} 
4:  \mu_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right)  , and  \mu_{p} = p5 +  \left(\frac{P6-P5}{1+(\frac{N_{a}}{p7}) ^{p8}} \right) 
13:  \mu_{n,0} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) ,  \mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6}  , and  \tau_{p} = \tau_{n} 
24:  \mu_{n,0} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}}{p3}) ^{p4}} \right) ,  \mu_{n} = \tau_{n,0} \times (\frac{T}{p5}) ^{p6}  , and 
     \mu_{p,0} = p7 +  \left(\frac{P8-P7}{1+(\frac{N_{d}}{p9}) ^{p10}} \right) ,  \mu_{p} = \tau_{p,0} \times (\frac{T}{p11}) ^{p12} .

If the mobility is for activated dopant density then 

31:  \mu_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right)  , and  \mu_{p} = \mu_{n} 
41:  \mu_{n} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right)  , and  \mu_{p} = p5 +  \left(\frac{P6-P5}{1+(\frac{N_{a}^{-}}{p7}) ^{p8}} \right) 
131:  \mu_{n,0} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) ,  \mu_{n} = \mu{n,0} \times (\frac{T}{p5}) ^{p6}  , and  \tau_{p} = \tau_{n} 
241:  \mu_{n,0} = p1 +  \left(\frac{P2-P1}{1+(\frac{N_{d}^{+}}{p3}) ^{p4}} \right) ,  \mu_{n} = \mu_{n,0} \times (\frac{T}{p5}) ^{p6}  , and 
     \mu_{p,0} = p7 +  \left(\frac{P8-P7}{1+(\frac{N_{a}^{-}}{p9}) ^{p10}} \right) ,  \mu_{p} = \mu_{p,0} \times (\frac{T}{p11}) ^{p12} .
取自 "http://yrwu-wk.ee.ntu.edu.tw/mediawiki/index.php?title=$usemubydopeT&oldid=875"