"$outfile" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) (已建立頁面，內容為 "required input tag this command is a very important command. It defines the output tag of all output file. Including the result of different bias etc... All output f...") |
Jameshuang (對話 | 貢獻) |
||
| 行 2： | 行 2： | ||
exmaple outfile project_1_result.out or with the path outfile home test xxxx project_1_result.out |
exmaple outfile project_1_result.out or with the path outfile home test xxxx project_1_result.out |
||
| + | |||
| + | <big><big>'''Format'''</big></big> |
||
| + | $outfile |
||
| + | project_1.out |
||
| + | or you wanna add the outfile path |
||
| + | $outfile |
||
| + | /username/Desktop/simulation_example/project_1.out |
||
於 2017年8月15日 (二) 13:27 的修訂
required input tag this command is a very important command. It defines the output tag of all output file. Including the result of different bias etc... All output file will have the same tag as you define here.
exmaple outfile project_1_result.out or with the path outfile home test xxxx project_1_result.out
Format
$outfile project_1.out
or you wanna add the outfile path
$outfile /username/Desktop/simulation_example/project_1.out
