"$negfifscaled" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$negfifscaled is the command to setup the scale for transport direction. The unit is a meter.<br> Example for 0.1nm: $negfifscaled 1.0e-10") |
|||
| (未顯示同一使用者於中間所作的 9 次修訂) | |||
| 行 1： | 行 1： | ||
| − | $negfifscaled is the command to setup the scale |
+ | $negfifscaled is the command to setup the scale, determine the mesh size you want along the transport direction. The unit is a meter. You can also use this function and set the parameter with our GUI version at the input box of "Trans Scale" in GUI<br> |
| − | + | ||
$negfifscaled |
$negfifscaled |
||
| ⚫ | |||
| + | 1D grid size along the transport direction <br> |
||
| + | Example(0.1nm): |
||
| + | $negfifscaled |
||
| ⚫ | |||
| + | related commands: |
||
| + | [[$ifsolvenegf]] |
||
於 2019年6月18日 (二) 01:09 的最新修訂
$negfifscaled is the command to setup the scale, determine the mesh size you want along the transport direction. The unit is a meter. You can also use this function and set the parameter with our GUI version at the input box of "Trans Scale" in GUI
$negfifscaled 1D grid size along the transport direction
Example(0.1nm):
$negfifscaled 1.0E-10
related commands:
$ifsolvenegf
