"$negfionizedimpurity" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| (未顯示同一使用者於中間所作的 11 次修訂) | |||
| 行 1： | 行 1： | ||
| − | $negfionizedimpurity is the command to setup the related parameters of ionized impurity scattering.<br> |
+ | $negfionizedimpurity is the command to setup the related parameters of ionized impurity scattering. You can also use this function and set the parameter with our GUI version at the input box of "Scattering Parameters" in GUI<br> |
The equation of ionized impurity scattering: |
The equation of ionized impurity scattering: |
||
<math>W_{imp}(k)=4\pi F(\frac{2k}{\lambda})^{2}[\frac{1}{\sin^2(\frac{\theta}{2})+(\frac{\lambda}{2k})^2}]^{2}</math><br> |
<math>W_{imp}(k)=4\pi F(\frac{2k}{\lambda})^{2}[\frac{1}{\sin^2(\frac{\theta}{2})+(\frac{\lambda}{2k})^2}]^{2}</math><br> |
||
<math>F=\frac{1}{\hbar}[\frac{Ze^{2}}{\epsilon}]^{2}\frac{N_{1D}(E_{k})}{32k^{4}}N_{I}</math><br> |
<math>F=\frac{1}{\hbar}[\frac{Ze^{2}}{\epsilon}]^{2}\frac{N_{1D}(E_{k})}{32k^{4}}N_{I}</math><br> |
||
| + | |||
| + | $negfionizedimpurity |
||
| + | doping_density (S and D) doping_density (channel) channel_initial channel_final |
||
| + | |||
Example: |
Example: |
||
$negfionizedimpurity |
$negfionizedimpurity |
||
| − | + | 1.0e0 1.0e24 300 400 |
|
| − | + | ||
| − | In this case we have 681 mesh grids from drain(left) to source(right), |
+ | In this case we have 681 mesh grids from drain(left) to source(right), and the position of channel is from 300 to 400. The doping concentration for source and drain is <math>1*10^{24}(1/m^2)</math>, and that for channel is <math>1*10^{0}(1/m^2)</math>.<br> |
| + | related commands: |
||
| + | [[$ifsolvenegf]], [[$negfifscattering]] |
||
於 2019年6月18日 (二) 01:12 的最新修訂
$negfionizedimpurity is the command to setup the related parameters of ionized impurity scattering. You can also use this function and set the parameter with our GUI version at the input box of "Scattering Parameters" in GUI
The equation of ionized impurity scattering:
![W_{imp}(k)=4\pi F(\frac{2k}{\lambda})^{2}[\frac{1}{\sin^2(\frac{\theta}{2})+(\frac{\lambda}{2k})^2}]^{2}](/mediawiki/images/math/6/6/8/6687c83c4a4989a497a8373d0f59c360.png)
![F=\frac{1}{\hbar}[\frac{Ze^{2}}{\epsilon}]^{2}\frac{N_{1D}(E_{k})}{32k^{4}}N_{I}](/mediawiki/images/math/a/f/a/afa443190ef1e46e78f3fcf8a754f3e8.png)
$negfionizedimpurity doping_density (S and D) doping_density (channel) channel_initial channel_final
Example:
$negfionizedimpurity 1.0e0 1.0e24 300 400
In this case we have 681 mesh grids from drain(left) to source(right), and the position of channel is from 300 to 400. The doping concentration for source and drain is 
, and that for channel is 
.
related commands:
$ifsolvenegf, $negfifscattering
