"$xgradualdiv" 修訂間的差異

於 2024年10月21日 (一) 17:38 的最新修訂

This function is to determine how the segment is divided. There are two columns to fill in. The first column i should be filled in an integer 0, 1, or 2.

i = 0:	Uniform. This means the segment is divided equally with the same spacing.
i = 1:	Gradual. This means the segment is divided whether from small spacing to large spacing or in the opposite way. The spacing is distributed like a geometric progression
i = 2:	Bump. This means the segment can be divided into two forms small-large-small or large-small-large.

The second column r should be filled in a real number.

If the total layer thickness is  and i=1, then if the smallest separation distance is a 

where N is the total grid number defined in $xdiv
Then   

If the total layer thickness is  and i=2, then if the smallest separation distance is a 

where N is the total grid number defined in $ydiv
Then   

Example

$xnode
0.0
20.0
40.0
60.0

$xdiv
30 
70 
80

$xgradualdiv
0 
1 1.1
2 0.95

The $xgradualdiv setting in GUI interface is here
1. After setting up the X-nodes, press Edit the nodes.
2. Choose the 1^st node and set the Method to Uniform with a Mesh ratio of 0.00.


3. Choose the 2^nd node and set the Method to Gradual change with a Mesh ratio of 1.10.


4. Choose the 3^rd node and set the Method to Bump with a Mesh ratio of 0.95.

Related commands

$ygradualdiv , $xnode,$xdiv