"$usedvprofile" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$usedvprofile par%dvfile xmin , xmax , position_offset_from_ddcc_to_MC dVfile format is N X1 E1 vel_1 X2 E2 vel_2 X3 E3 vel_3 X4 E4 vel_4 .......") |
|||
| 行 20： | 行 20： | ||
21.0 41.0 21.0 |
21.0 41.0 21.0 |
||
| − | dVfile is |
||
| + | dvMCfilename file's content is |
||
| + | |||
201 |
201 |
||
0.0 100.0 1.0e6 |
0.0 100.0 1.0e6 |
||
於 2021年2月2日 (二) 10:01 的修訂
$usedvprofile par%dvfile xmin , xmax , position_offset_from_ddcc_to_MC
dVfile format is
N X1 E1 vel_1 X2 E2 vel_2 X3 E3 vel_3 X4 E4 vel_4 .... For example, MC runs 20nm. from 0 to 20nm, DDCC's channel region is 21.0nm to 41nm. So the command is $usedvprofile dvMCfilename 21.0 41.0 21.0
dvMCfilename file's content is
201 0.0 100.0 1.0e6 0.1 100.0 1.2e6 0.2 ... ... 20.0
