"$addefmassxyz" 修訂間的差異
出自 DDCC TCAD TOOL Manual
行 3: | 行 3: | ||
$addefmassxyz |
$addefmassxyz |
||
− | type mhh_z mhh_x mhh_y N_valley mlh_z mlh_x mlh_y N_valley me_z me_x me_y N_valley me2_z me2_x me2_y N_valley |
+ | type mhh_z mhh_x mhh_y N_valley <math>\Delta E_{hh}</math> mlh_z mlh_x mlh_y N_valley <math>\Delta E_{lh}</math> me_z me_x me_y N_valley <math>\Delta E_{c}</math> me2_z me2_x me2_y N_valley <math>\Delta E_{c2}</math> |
If type = 1, the 2nd electron valley is not considered. For example, For Si in the bulk condition with 6 valleys |
If type = 1, the 2nd electron valley is not considered. For example, For Si in the bulk condition with 6 valleys |
||
$addefmassxyz |
$addefmassxyz |
||
− | 1 0.45 0.45 0.45 1 0.87 0.87 0.87 1 0.19 0.19 0.98 6 |
+ | 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0 |
− | 1 0.45 0.45 0.45 1 0.87 0.87 0.87 1 0.19 0.19 0.98 6 |
+ | 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0 |
− | 1 0.45 0.45 0.45 1 0.87 0.87 0.87 1 0.19 0.19 0.98 6 |
+ | 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0 |
If type = 2, the 2nd electron valley is not considered. |
If type = 2, the 2nd electron valley is not considered. |
||
− | For GaAs material with 2nd valley has 3 valley in the X valley |
+ | For GaAs material with 2nd valley has 3 valley in the X valley above gamma by 0.35eV |
$addefmassxyz |
$addefmassxyz |
||
− | 2 0.45 0.45 0.45 1.0 0.78 0.78 0.78 1.0 0.067 0.067 0.067 1.0 1.0 0.15 0.15 3.0 |
+ | 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35 |
− | 2 0.45 0.45 0.45 1.0 0.78 0.78 0.78 1.0 0.067 0.067 0.067 1.0 1.0 0.15 0.15 3.0 |
+ | 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35 |
− | 2 0.45 0.45 0.45 1.0 0.78 0.78 0.78 1.0 0.067 0.067 0.067 1.0 1.0 0.15 0.15 3.0 |
+ | 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35 |
於 2024年6月17日 (一) 17:58 的修訂
$addefmassxyz is the command to input effective mass along different directions and considering the valley number. The format is Z is the growth direction.
$addefmassxyz type mhh_z mhh_x mhh_y N_valley mlh_z mlh_x mlh_y N_valley me_z me_x me_y N_valley me2_z me2_x me2_y N_valley
If type = 1, the 2nd electron valley is not considered. For example, For Si in the bulk condition with 6 valleys
$addefmassxyz 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0 1 0.45 0.45 0.45 1 0.0 0.87 0.87 0.87 1 0.0 0.19 0.19 0.98 6 0.0
If type = 2, the 2nd electron valley is not considered. For GaAs material with 2nd valley has 3 valley in the X valley above gamma by 0.35eV
$addefmassxyz 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35 2 0.45 0.45 0.45 1.0 0.0 0.78 0.78 0.78 1.0 0.0 0.067 0.067 0.067 0.0 1.0 1.0 0.15 0.15 3.0 0.35