"$xnode" 修訂間的差異
出自 DDCC TCAD TOOL Manual
行 19: | 行 19: | ||
10.0000 |
10.0000 |
||
It means the 1<sup>st</sup> x-point is at 0.0 (μm); the 2<sup>nd</sup> is at 1.1 (μm); and the last is at 10.0 (μm). |
It means the 1<sup>st</sup> x-point is at 0.0 (μm); the 2<sup>nd</sup> is at 1.1 (μm); and the last is at 10.0 (μm). |
||
⚫ | |||
+ | |||
<br>'''<big><big>The $xnode setting in GUI interface is here</big></big>''' <br> |
<br>'''<big><big>The $xnode setting in GUI interface is here</big></big>''' <br> |
||
行 32: | 行 32: | ||
[[檔案:2D_xnode_fig4.jpg|1200px]]<br><br> |
[[檔案:2D_xnode_fig4.jpg|1200px]]<br><br> |
||
− | |||
⚫ | |||
; Related commands |
; Related commands |
||
: [[$xnode]], [[$ynode]], [[$xd]], [[$xdiv]], [[$xgradualdiv]], [[$ygradualdiv]], [[$ydiv]],[[$ynode]] |
: [[$xnode]], [[$ynode]], [[$xd]], [[$xdiv]], [[$xgradualdiv]], [[$ygradualdiv]], [[$ydiv]],[[$ynode]] |
於 2024年10月21日 (一) 17:21 的修訂
The x-coordinate for each x node. The number of rows (n) depends on the function $xsecysecmaxob.
- Unit: μm
- Format
$xnode x1 x2 . . . xn
- Example
$xsecysecmaxob 3 5 2
$xnode 0.0000 1.1000 10.0000
It means the 1st x-point is at 0.0 (μm); the 2nd is at 1.1 (μm); and the last is at 10.0 (μm).
The $xnode setting in GUI interface is here
1. Press Mesh Setting and choose Manual mesh.
2. Choose X-node point and set the 1st X-point to 0.0 (μm).
3. Continue set the 2nd X-point to 1.1 (μm).
4. Continue by setting the last X-point to 10.0 (μm).
5. Get 3 X-nodes!
- Related commands
- $xnode, $ynode, $xd, $xdiv, $xgradualdiv, $ygradualdiv, $ydiv,$ynode