$negfionizedimpurity

$negfionizedimpurity is the command to setup the related parameters of ionized impurity scattering.
The equation of ionized impurity scattering:

 $W_{imp}(k)=4\pi F(\frac{2k}{\lambda }{)}^2[\frac{1}{{\sin }^2(\frac{\theta }{2})+(\frac{\lambda }{2k}{)}^2}{]}^2$

 $F=\frac{1}{\hslash }[\frac{Z{e}^2}{ϵ}{]}^2\frac{N_{1D}(E_k)}{32k^4}{N}_I$

$negfionizedimpurity
doping density (S and D)   doping density (channel)   channel-i   channel-f

Example:

$negfionizedimpurity
 doping density (S and D)   doping density (channel)   channel-i   channel-f

In this case we have 681 mesh grids from drain(left) to source(right), and the position of channel is from 300 to 400. The doping concentration for source and drain is $1*10^{24}(1/m^2)$, and that for channel is $1*10^0(1/m^2)$.
related commands:

 $ifsolvenegf,  $negfifscattering