"$dirrecombine" 修訂間的差異
出自 DDCC TCAD TOOL Manual
Jameshuang (對話 | 貢獻) (已建立頁面，內容為 "Setting the B0 recombination coefficient of each layer. If the material has n-layers you need to set B0 for each layer. <br /> <big><big>'''Format'''</big></big><br...") |
Jameshuang (對話 | 貢獻) |
||
| 行 4： | 行 4： | ||
$dirrecombine |
$dirrecombine |
||
| − | b_1 |
||
| + | B_1 |
||
| − | b_2 |
||
| + | B_2 |
||
| − | + | B_3 |
|
... |
... |
||
| − | + | B_n |
|
<big><big>'''Example'''</big></big><br /> |
<big><big>'''Example'''</big></big><br /> |
||
於 2017年8月16日 (三) 03:44 的修訂
Setting the B0 recombination coefficient of each layer. If the material has n-layers you need to set B0 for each layer.
Format
$dirrecombine B_1 B_2 B_3 ... B_n
Example
$dirrecombine 2.00e-11 2.00e-11 2.00e-11 2.00e-11 2.00e-11
