"$RCWAxnode" 修訂間的差異
出自 DDCC TCAD TOOL Manual
| 行 1： | 行 1： | ||
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in [[$RCWAxdiv]]. It also needs to goes with the [[$RCWAxdiv]] and [[$RCWAperiod]] to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period. |
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in [[$RCWAxdiv]]. It also needs to goes with the [[$RCWAxdiv]] and [[$RCWAperiod]] to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period. |
||
$RCWAxnode<br> |
$RCWAxnode<br> |
||
| − | 3 |
||
| + | -10000 10000 30000 |
||
| − | 3 |
||
| + | -10000 10000 30000 |
||
| − | 3 |
||
| + | -10000 -2500 2500 10000 30000 |
||
| − | 3 |
||
| + | -10000 10000 30000 |
||
| − | 3 |
||
| + | -10000 10000 30000 |
||
... |
... |
||
total layer |
total layer |
||
| + | [[檔案:RCWA2D_input.jpg]] |
||
於 2020年6月16日 (二) 10:24 的修訂
The $RCWAxnode command is used to define the position of boundary point in each layer which assigned in $RCWAxdiv. It also needs to goes with the $RCWAxdiv and $RCWAperiod to define number of boundary point and the period of simulation domain. The left boundary point does not need to assign which automatically set as -2/period.
$RCWAxnode
-10000 10000 30000 -10000 10000 30000 -10000 -2500 2500 10000 30000 -10000 10000 30000 -10000 10000 30000 ... total layer
