"$RandomizedR" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$RandomizedR is a special command to setup the random alloy structures. The format is $RandomizedR Region_Number_used Random_type location_N_used seeding_num loc...") |
|||
| 行 10： | 行 10： | ||
Method=0 fully random number |
Method=0 fully random number |
||
| − | Method=1 P1=dx, P2=average_com, P3=sigma, P4=indium_low P5=dn |
+ | Method=1 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn |
| + | |||
| + | |||
| + | Example: |
||
| + | |||
| + | |||
| + | $RandomizedR |
||
| + | 5 1 20 -10 |
||
| + | 13 14 15 16 17 18 19 20 21 22 23 .... 32 |
||
| + | 3 0 （QW location) |
||
| + | 5 0 |
||
| + | 7 0 |
||
| + | 9 0 |
||
| + | 11 1 2e-4 15 6.8e-4 0.01 0.02 |
||
於 2020年12月8日 (二) 12:10 的修訂
$RandomizedR is a special command to setup the random alloy structures. The format is
$RandomizedR Region_Number_used Random_type location_N_used seeding_num location_1 location_2 ...... location_N Region_1 method P1 P2 P3 P4 P5 .... Region_2 method P1 P2 P3 P4 P5 .... ... Region_N method P1 P2 P3 P4 P5 ....
Method=0 fully random number Method=1 P1=dx(um), P2=average_com, P3=sigma, P4=indium_low P5=dn
Example:
$RandomizedR 5 1 20 -10 13 14 15 16 17 18 19 20 21 22 23 .... 32 3 0 （QW location) 5 0 7 0 9 0 11 1 2e-4 15 6.8e-4 0.01 0.02
