"$ifTversusJ" 修訂間的差異
出自 DDCC TCAD TOOL Manual
(已建立頁面，內容為 "$ifTversusJ is the command to estimate the temperature in the channel loss. The command is $ifTversusJ 1 thermal_resistance_P1 <math> T = T_{ref} + P1 * pow...") |
|||
| 行 2： | 行 2： | ||
$ifTversusJ |
$ifTversusJ |
||
| − | + | type thermal_resistance_P1 |
|
| − | + | ||
| + | Currently type is 1. |
||
<math> T = T_{ref} + P1 * power_loss </math> |
<math> T = T_{ref} + P1 * power_loss </math> |
||
| + | P1 is the thermal resistance <math> P1 : K/(W/cm^{2}) </math> |
||
Power loss would be the joul-heat-loss, nonradiative recombination loss, Auger recombination loss |
Power loss would be the joul-heat-loss, nonradiative recombination loss, Auger recombination loss |
||
| + | |||
| + | |||
| + | $ifTversusJ |
||
| + | 1 0.01 |
||
於 2021年6月9日 (三) 09:47 的修訂
$ifTversusJ is the command to estimate the temperature in the channel loss. The command is
$ifTversusJ type thermal_resistance_P1 Currently type is 1.
P1 is the thermal resistancePower loss would be the joul-heat-loss, nonradiative recombination loss, Auger recombination loss
$ifTversusJ 1 0.01
